unisonic technologies co., ltd mac97a6/8 triacs www.unisonic.com.tw 1 of 5 copyright ? 2012 unisonic technologies co., ltd qw-r401-023.d logic level triac ? description logic level sensitive gate triac int ended to be interfaced directly to microcontrollers, logic integrated circuits and other low power gate trigger circuits. ? features *blocking voltage to 600 v (mac97a8) *rms on-state current to 0.6 a *sensitive gate in all four quadrants ? applications *general purpose bidirectional switching *phase control applications *solid state relays. ? symbol mt2 mt1 g ? ordering information order number package pin assignment packing lead free halogen free 1 2 3 mac97a6l-aa3-r mac97a6g-aa3-r sot-223 mt1 mt2 gate tape reel mac97a6l-t92-b MAC97A6G-T92-B to-92 mt1 gate mt2 tape box mac97a6l-t92-k mac97a6g-t92-k to-92 mt1 gate mt2 bulk mac97a6l-t92-r mac97a6g-t92-r to-92 mt1 gate mt2 tape reel mac97a8l-aa3-r mac97a8g-aa3-r sot-223 mt1 mt2 gate tape reel mac97a8l-t92-b mac97a8g-t92-b to-92 mt1 gate mt2 tape box mac97a8l-t92-k mac97a8g-t92-k to-92 mt1 gate mt2 bulk mac97a8l-t92-r mac97a8g-t92-r to-92 mt1 gate mt2 tape reel
mac97a6/8 triacs unisonic technologies co., ltd 2 of 5 www.unisonic.com.tw qw-r401-023,d ? absolute maximum ratings characteristic symbol ratings unit repetitive peak off-state voltage (t j =25 ~125c) mac97a6 v drm 400 v mac97a8 600 v rms on-state current (full sine wave, t lead 50c) i t ( rms ) 0.6 a non-repetitive peak on-state current (full sine wave, t j =25c prior to surge) t=20ms i tsm 8.0 a t=16.7ms 8.8 a i 2 t for fusing (t=10ms) i 2 t 0.32 a 2 s repetitive rate of rise of on-state current after triggering (i tm =1.0a, i g =0.2a, di g /dt=0.2a/ s) t2+g+ di t /dt 50 a/ s t2+g- 50 a/ s t2-g- 50 a/ s t2-g+ 10 a/ s peak gate voltage [ t=2 s (max) ] v gm 5 v peak gate current [ t=2 s (max) ] i gm 1 a peak gate power [ t=2 s (max) ] p gm 5 w average gate power [ t c =80 , t=2us (max) ] p g ( av ) 0.1 w operating junction temperature t j -40~+125 c storage temperature t stg -40~+150 c note: absolute maximum ratings are those values beyond which the device could be permanently damaged. absolute maximum ratings are stress ratings only and functional device oper ation is not implied. ? thermal data parameter symbol ratings unit junction to ambient to-92 ja 150 c/w sot-223 165 c/w ? static characteristics (t j =25 , unless otherwise specified) ? dynamic characteristics (t j =25 , unless otherwise specified) parameter symbol test conditions min typ max units gate trigger current i gt v d =12v, i t =0.1a t2+g+ 1 5 ma t2+g- 2 5 ma t2-g- 2 5 ma t2-g+ 4 7 ma latching current i l v d =12v, i gt =0.1a t2+g+ 1 10 ma t2+g- 5 10 ma t2-g- 1 10 ma t2-g+ 2 10 ma holding current i h v d =12v, i gt =0.1a 1 10 ma on-state voltage v t i t =0.85a 1.4 1.9 v gate trigger voltage v gt v d =12v,i t =0.1a 0.9 2 v v d =v drm , i t =0.1a, t j =110c 0.1 0.7 v off-state leakage current i d v d =v drm ( ma x ) , t j =110c 3 100 a parameter symbol conditions min typ max units critical rate of rise of off-state voltage dv d /dt v d =67% of v drm(max) , t c =110c, exponential waveform, gate open circuit 30 45 v/ s critical rate of rise of commutation voltage dv com /dt v d =rated v drm , t c =50c, l tm =0.84a, commutating dl/dt=0.3a/ms 5 v/ s gate controlled turn-on time t gt i tm =1.0a,v d =v drm(max) , i g =25ma,di g /dt=5a/ s 2 s
mac97a6/8 triacs unisonic technologies co., ltd 3 of 5 www.unisonic.com.tw qw-r401-023,d ? typical characteristics 10 10 10 1 10 10 10 transient thermal impedance from junction to ambient as a function of pulse duration. 10 10 10 1 3 2 -5 -4 -3 -2 -1 zth(j-a)/kw p t p t t p (s) maximum on-state dissipation as a function of rms on-state curren t; typical values. =conduction angle. 0.6 0 0 p d (w) i t(rms) /a 0.4 0.2 0.8 1.2 0.6 0.4 0.2 =180 =120 = 90 = 60 = 30 1 0.8 10 10 10 1000 10 100 10 t p /s 10 1 maximum permissible non-repetitive peak on- state current as a functi on of pulse width for sinusoidal currents;tyical values. t p 20ms. i tsm (a) -5 -4 -1 -3 -2 i t time i tsm t j initial=25c max t i tsm (a) maximum permissible non-repetitive peak on-state current as a function of number of cycles for sinusoidal currents; typical values . n=number of cycles at f=50hz. 8 4 0 10 10 2 1 10 6 2 10 3 i t time i tsm t j initial=25c max t 80 100 040 20 1 0.6 t lead (c) 0 0.8 i t(rms) (a) maximum permissible rms current as a function of lead temperature; typical values. 0.4 0.2 60 120 140 3 1.5 2 2.5 1 0 i t(rms) (a) 10 -3 10 -2 1 10 maximum permissible repetitive rms on-state current as a function of surge duration for sinusoidal currents; typical values. f=50hz; t lead 50c 0.5 tsurge(s)
mac97a6/8 triacs unisonic technologies co., ltd 4 of 5 www.unisonic.com.tw qw-r401-023,d ? typical characteristics(cont.) -60 1.6 0.8 t j (c) 1.2 1.4 1 0.6 0.4 normalized gate trigger voltage as a of function junction temperature; typical values. -10 40 90 0.2 0 140 v gt (25c) 60 100 -60 20 -20 1 t j (c) 2 2.5 1.5 0.5 0 normalized gate trigger current as a function of junction temperature; typical values. 140 i gt (25c) t2+g+ t2-g+ t2-g- t2+g- 1 2 2.5 1.5 0.5 0 60 100 -60 20 -20 140 i l (25c) 1 2 2.5 1.5 0.5 0 60 100 -60 20 -20 140 i h (25c) 1.5 1 0.5 2.0 1.6 1. 2 0.8 0. 4 0 2.0 max typ max v gt (t j ) normalized latching current as a function of junction temperature; typical values. normalized holding current as a function of junction temperature; typical values. i h (t j ) t j (c) t j (c) on-state current as a function of on-state voltage; typical and maximum values. i t (a) t j =125c t j =25c v t (v) i gt (t j ) i l (t j ) 120 140 40 0 1000 10 dv d /dt(v/us) 1 100 20 60 80 100 critical rate of rise of off-state voltage as a function of junction temperature; typical values. t j (c)
mac97a6/8 triacs unisonic technologies co., ltd 5 of 5 www.unisonic.com.tw qw-r401-023,d utc assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all utc products described or contained herein. utc products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. the information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice.
|
